Skip to main content

How to Properly Align Photo Eye Sensors

garage door repair

What Are Photo-Eye Sensors

Photo-eye sensors on a garage door(s) is a safety feature that stops the door from closing if the photo eye senses an obstruction in its pathway. This will prevent damage to vehicles, people, or pets in the path of the door.

How Photo-Eye Sensors Work

Photo-eye sensors are on each side of the garage door, typically about 6 inches above the ground. One of the sensors directs a beam towards the other, and if there’s an object interrupting that beam, the sensors prevent the garage door from closing. If they become misaligned, which happens more frequently than you’d think, your photo eye sensors will need some adjustments.

How To Align Sensors

  1. Make sure there’s nothing obstructing the signal between the sensors. If there’s an item in the way, the sensors will not be able to communicate with one another.
  2. Check the wires leading to the sensors, making sure they’re connected properly and aren’t damaged.
  3. Make slight adjustments to your photo-eye sensors by hand until they’re realigned. Remember to be gentle when you’re making adjustments; the sensors are quite delicate. Adjust the sensor that is not lit, and once it’s in the correct position you should see the light back on. Your door should be working properly again once this is done.
  4. If 1-3 does not get the sensors working properly, double-check to see if the units are dirty. Use a cloth to lightly wipe the lens of each sensor, removing any dirt or build-up.

Check Proper Operation

After making the necessary adjustments to your photo-eye sensors and ensuring that they’re clear of any obstructions and/or debris, try operating your door while checking for prompt, smooth operation. Your door should open and close as expected.

Next, test to ensure the sensors will stop the door from closing. As stated previously, this is a critical safety component, which could prevent serious injury. While the door is closing move a large object such as a trash can in front of the sensor. The door should immediately stop closing. If it does not, contact a garage door repair professional such as A1 Door Co.

If your door still refuses to function as expected, contact A1 Door Company to inspect your system and recommend repairs. We’ve been helping homeowners in Richmond, Virginia region such as Short Pump, VA with all their garage door needs for over 15 years.

How Much Does It Cost To Repair A Garage Door?

If your garage door is broken or not working properly, you may be wondering, “how much will it cost for this garage door repair?”. As garage door professionals serving the Richmond, VA area, we get more questions about repair cost than any other question. Unfortunately, there is no single answer, and the repair cost can vary based on a number of factors.

Here you’ll find a summary of many of the common types of repairs and some of the associated costs.


General Repair Costs

The cost to repair a garage door can vary depending on the type of repair needed and the location of the repair service.

On average, the cost for a simple repair such as fixing a broken spring or cable can range from $200 to $500. However, more complex repairs such as replacing the entire door or repairing the motor can easily rise to $1,000 or more.


What If My Garage Door Has Come Off The Track?

If a garage door has come off its track, the cost to repair it will depend on the extent of the damage and the type of repair needed. In general, the cost for this type of repair can range from $200 to $500.

If the track is bent or damaged, it may need to be replaced, which can increase the cost of the repair. Additionally, if the door has been damaged or if the opener is not functioning properly, these issues will need to be addressed as well, which can further increase the cost.

It’s important to address a garage door that has come off its track as soon as possible, as attempting to operate the door in this condition can cause further damage and pose a safety hazard


How Much Does It Cost To Replace A Garage Door Panel?

Perhaps a small accident from a vehicle has damaged on of your garage panels. Not to worry. In some cases just a single panel can be replaced on a garage door.

The cost to replace a garage door panel can vary depending on several factors, such as the material and size of the panel, the extent of the damage, and the location of the repair service.

On average, replacing a single garage door panel can cost anywhere from $500 to $1,000. However, if you have a custom garage door or the panel is made of a more expensive material, such as wood or glass, the cost may be higher.

It’s also worth noting that if your garage door is older or if the damage is extensive, it may be more cost-effective to replace the entire door rather than just the panel. One of our technicians can evaluate your garage door and provide guidance on your repair options an the costs involved.

How Much Does It Cost To Replace A Garage Door Opener?

The cost to replace a garage door opener can vary depending on several factors, including the type of opener, the brand, and any additional features or accessories. On average, the cost for a basic garage door opener can range from $500 to $800.

However, if you opt for a higher-end opener with more features such as Wi-Fi connectivity or battery backup, the cost can be higher, ranging from $800 to $1,200 or more.

It’s also worth noting that the cost of installation may be separate from the cost of the opener itself. Some garage door repair companies may offer installation services as part of the purchase price, while others may charge a separate fee.

image: garage door opener

Contact A Garage Door Repair Professional

With a garage door, something you and your family count on every day, don’t take a chance on a low quality repair.

At A1 Door Company, we pride ourselves on the amount of training our technicians go through to ensure your garage door repair is done right. Because of our scale, and the fact that we’re dedicated to garage door repair, we know we can handle your repair needs. Contact us today!

Why You Should Leave Broken Spring Repairs to the Pros

Out of all the garage door issues you can face, broken springs represent one of the most common – and noticeable! You may notice that your garage door is crooked, it only opens about six inches, or the cables are loose. Regardless of the symptom, it is important for your safety to have this repaired as soon as possible.

Garage door spring repairs are no easy feat, however. The proper repair involves a combination of the right tools as well as the right knowledge. With that in mind, it is best to leave this repair project to a trained professional.

Below are a few more reasons why you should only trust garage door spring repairs to the professionals:

Pros Know What Spring You Need
While garage door springs all perform the same function (lifting and managing the weight of your garage door), not every replacement spring is made the same. There are several different types of springs on the market, which differ in size, weight, and tension. Picking an incompatible model will result in wasted money and a faulty garage door. A trained professional will be able to find the right spring for you and get your overhead doors moving again.

Pros Can Handle the Tension
Garage door springs operate under an immense amount of tension. Broken or not, the pressure that these springs are under makes them quite dangerous to handle. Springs can (and will) snap or rebound back when not dealt with correctly. Without the right knowledge, DIYers put their selves at great risk when they try to make these changes on their own. A garage door professional knows exactly how to safely remove springs without any damage to their selves or the door itself.

Pros Will Spot Other Problems
While there may be a few times where the springs are the only issue, what if they are just the tip of the iceberg? Having an expert have a look at your system is key, as they will be able to notice other issues at play. There is a good chance that your new springs will not be able to work properly until other aspects of your door have been addressed, so be sure to call a professional to have a look at the whole system.

There are certainly garage door fixes and maintenance practices that you can DIY. But when it comes to garage door springs, a trained technician will be the best source of help for you. A1 Door Company has been offering professional garage door repairs to Mechanicsville, VA, and surrounding cities for over 15 years! Give us a call today to learn more.

Skip to content